NEWS CENTER
Qing Forging's first EP-1600 direct-drive electric screw press was successfully trial-produced
- Release time:2019-08-14
- 访问量：
【概要描述】Qing Forging's first EP-1600 direct-drive electric screw press was successfully trial-produced on August 15, 2019. Through acceptance, its performance meets its design requirements.
Qing Forging's first EP-1600 direct-drive electric screw press was successfully trial-produced
【概要描述】Qing Forging's first EP-1600 direct-drive electric screw press was successfully trial-produced on August 15, 2019. Through acceptance, its performance meets its design requirements.
- Release time:2019-08-14
- 访问量：
Qing Forging's first EP-1600 direct-drive electric screw press was successfully trial-produced on August 15, 2019. Through acceptance, its performance meets its design requirements.
The main technical parameters:
| Serial number | Main parameter name | Unit bit | Parameter value |
|
1 |
Nominal force |
kN |
16000 |
|
2 |
Allowable force |
kN |
25000 |
|
3 |
Movement part energy |
kJ |
280 |
|
4 |
Slider stroke |
mm |
550 |
|
5 |
Number of trips |
min-1 |
16 |
|
6 |
Minimum installation height |
mm |
750 |
|
7 |
Thickness of workbench pad |
mm |
200 |
|
8 |
Work table size (front and rear × left and right) |
mm×mm |
1200×1100 |
|
9 |
Dimensions of the bottom surface of the slider (front and rear × left and right) |
mm×mm |
1100×940 |
|
10 |
Topping method |
|
Hydraulic |
|
11 |
Maximum ejecting force |
kN |
250 |
|
12 |
Maximum ejecting stroke |
mm |
200 |
扫二维码用手机看
